Products by
LINE
|
Alphacast
(Kept in Memory of Spyros Koumousis)
|
Products by
TYPE
FEATURES
E-mail
the General
|
 |
Native Huts & Longhouses
for The Kris and the Flame
and Rough Riders!
Moro Wars
|
In support of Rough Riders! and The Kris And The
Flame" war game rules for the U.S. battles
against the Moro's and Filipino Insurectos in the Philippines, and those of Rajah Brooke against the Pirates and
Headhunters of Borneo, TVAG offer these authentic card stock designs for your tables.
Offered as PDF's and delivered by E-mail without charge, these easily assembled models are available
in both 15mm and 28mm scales! Better still, a bamboo walled fort such as the Moro's used is also available in 15mm scale.
All models are designed with superior photographic bamboo, thatch, and hard wood textures in order to
provide a remarkably detailed and convincing feel to your battle scapes, be they in the East Indies, the Philippines, or
most any tropical setting. Requiring only scissors, a craft knife, white glue, and in some cases 1/4 dowel cut to various
lengths, all PDF's are ready to print, then cut out and assemble for immediate use. By adding your own heavy matte or
foam core board for bracing, they will last for many years of active gaming.
There are 8 different building designs which may be bought singly or as a set in your choice of scales.
The dimensions provided are for a single 28mm/several 15mm models. These designs will work anytime from the 1840's and 50's
of Rajah Brooke, 1898 in the Philippines against the Insurectos and Moro's, and throughout the region through WW II.
Though many buildings are printed showing doors and windows open, these may be cut out for actual use,
and most have finished floor sections included for those wishing to place figures inside. Once again, when properly backed by
matte board or foam core, these models are sturdy and ready for a lifetime of gaming use.
(The Longhouses, with decks running around them, are shown supported by pilings NOT provided, but are easily
fashioned from dowel, the thicker type of bamboo skewers, or other small scrap in your bits box.)
 |
Hut #1
Cane Walled Longhouse: One 28mm 5 x 2.5 x3/
Two 15mm 2.5 x 1 x 1.5 on large Bamboo platform.
Price: $5.00
|
 |
Hut #2
Cane Walled Hut: One 28mm 2.5 square x 3
high/Two 15mm 1 square and 1.5
high, on large Bamboo
platform.
Price:
$5.00
|
 |
Hut #3
Bamboo pole walled: One 6 x 2 x 4/Two
3 x 1 x 1.5 high on large Bamboo platform.
Price:
$5.00
|
 |
Hut #4
Thatch Walled Longhouse: One 28mm 6 x 2.5 x 3
high/Two 15mm 3 x 1 x 1.5 high, on large Bamboo
platform.
Price:
$5.00
|
 |
Hut #5
Thatch Hut: One 28mm 3.5" square and 2"
high/Four 15mm 1.5 square and 1.5 high,
resting on ground.
Price:
$5.00
|
 |
Hut #6
Thatch Hut:
One 28mm 3.5 square and 3.5 high/Three
15mm 1.5 square and 1.5 high,
resting on ground.
Price: $5.00
|
 |
Hut #7
Thatch Hut:
One 28mm 3 square and 3 high,
elevated above ground with porch.
Price: $5.00
|
 |
Hut #8
Thatch Hut:
One 28mm 3 square and 3 high,
elevated above ground with porch.
Price: $5.00
|
 |
15mm Fort
Four sided square Fort with ramparts, walls 9.5 square and 2 high, complete with pole walled
Longhouse 3 x 1 x 1.5 high, mounted on large platform.
Price:
$10.00
|
 |
Entire Hut Collection
Either all 8 28mm designs, OR all 15 15mm models, including the Fort,
up a $45.00 value
for only
$20.00
|
|
Fall Back to The Virtual Armchair General's HOMEPAGE
|
|
All text, photos, and artwork are COPYRIGHT ©2003 by Patrick Wilson.
They may not be used without written permission.
Contact The Virtual Armchair General
Names of individual product
lines are trademarks (TM) of their manufacturers.
|
|
